Does anyone know if a set of b1h clocks will fit a c1h? Having the backing and colours changed on mine but need a set for the mean time and the b1h with higher miles on go cheaper :)
The C1 has an immobiliser doesn't it
swich,
This might be of use to you - was something I was looking to do update the clocks on my J model zx6 - I know the info is to mount it to a j model, but the pinouts on the connector for the B and C model gauges are the same - from reading it, I think the speedo drive would be well out, but that would be your only issue.
If you read to the end of the first post, you will see what I mean.
http://www.kawiforums.com/how-tos-faqs/82684-how-03-06-636-gauges-g-j-model-600-a.html
Dale
Quote from: Dq on December 19, 2013, 10:59:09 PM
swich,
This might be of use to you - was something I was looking to do update the clocks on my J model zx6 - I know the info is to mount it to a j model, but the pinouts on the connector for the B and C model gauges are the same - from reading it, I think the speedo drive would be well out, but that would be your only issue.
If you read to the end of the first post, you will see what I mean.
http://www.kawiforums.com/how-tos-faqs/82684-how-03-06-636-gauges-g-j-model-600-a.html
Dale
Shouldn't that be spelled 'Gages' ?
;)
Quote from: Dq on December 19, 2013, 10:59:09 PM
swich,
I think the speedo drive would be well out, but that would be your only issue.
The only thing I need is the speedo, so this is not a good thing.
I know you can get electronic signal converters for them, but it would probably be more trouble/cost than just getting hold of a set of C model clocks :)
what is the reason for the speedo being out?
Just mount a satnav or smartphone.
haha I dont have either of those, I'm a bit of a cave man