Can anyone recommend a good place to get radiators refurbished and repaired?
Give Bob a ring at www.conceptracing.co.uk
He makes rads for F1 teams so might be able to help
Thanks, will give them a shout.
Quote from: 1-600-matt on May 20, 2014, 10:38:44 AM
Can anyone recommend a good place to get radiators refurbished and repaired?
For a bike? - if so I'd check how much a new one is as a recore was a lot more expensive than I expected - try circa £350..........
Quote from: Gobert on May 20, 2014, 01:05:18 PM
Quote from: 1-600-matt on May 20, 2014, 10:38:44 AM
Can anyone recommend a good place to get radiators refurbished and repaired?
For a bike? - if so I'd check how much a new one is as a recore was a lot more expensive than I expected - try circa £350..........
Yeah, VFR400 nc30. Proper Honda ones are no longer available.
http://www.madhornets.com/radiator-honda-rvf400-nc30-nc35-vfr400-bottom-low/?gclid=CPqHmLbJur4CFcLItAodUgUAOA
Quote from: Dom1 on May 20, 2014, 02:09:47 PM
http://www.madhornets.com/radiator-honda-rvf400-nc30-nc35-vfr400-bottom-low/?gclid=CPqHmLbJur4CFcLItAodUgUAOA
Will look into that. Cheers
West Mercia Radiators advertise in Practical Sportsbike
That's who quoted me for a recore.............
So I spoke to Elliot's in cricklade who imported most of the grey bikes back in the day to see if they could get a Honda part... But they aren't available. Apparently the £100 ish rads available are cheap Chinese parts and don't last very well at all, they advise against them. I have been in touch with concept racing and will get a quote next week.
Anyone used cheap Chinese rads and have good or bad experience of a specific supplier?
Ya.
Quote from: 1-600-matt on May 23, 2014, 09:47:04 PM
So I spoke to Elliot's in cricklade who imported most of the grey bikes back in the day to see if they could get a Honda part... But they aren't available. Apparently the £100 ish rads available are cheap Chinese parts and don't last very well at all, they advise against them. I have been in touch with concept racing and will get a quote next week.
Anyone used cheap Chinese rads and have good or bad experience of a specific supplier?
Ya.
they melt