Folks, Im putting the front wheel from a ZX10 2004 onto a ZX10 2007
The 04 wheel takes a 20mm axle and 07 takes 25mm axle
The 04 bearing is 6004...ID-20 OD-42 D-12
The 07 bearing is 6005...ID-25 OD-47 D-12
I need the bearing from an 04 ZX10 but with an ID 0f 25mm.... ID-25 OD-42 D-12.....any ideas where i can get one? Someone mentioned this size is used on a KX250 but i cant find anything to support that
Ive emailed a few bearing suppliers but they seem to only stock standard size bearings!
Cheers
The only bearings ive found in that size are....
http://www.unicycle.uk.com/koxx-light-isis-hub-36-hole.html
But they are for a unicycle lol!!!!!!!!!!
at 42 OD with an ID of 25 you only have 17mm which is 8.5mm a side, no way in the world will you get a bearing that size that would be suitable for the from wheel of a super bike.
You'd be better going down the route of using the 20mm dia axle and getting sleeves made to fit the fork bottoms.
You've not seen how slow i ride :rofl:
Good point well made! My main concern was safety hence the threads on this.