Ive got a Racefit growler for an 09 ZX10......is it going to be hard to find someone to make me a link pipe so it fits the 06 zx10?
(http://i62.tinypic.com/200yd1j.jpg)
It will need the rivets drilling out (which i can do) then either a new inlet cap (no idea what its called) with a link pipe with the correct bends
Or forget the above and just cut the link pipe off altogether and get a new one made to the correct bends and get it welded on to the existing inlet cap
Ive emailed Racefit to see if they sell this part but im still awaiting a reply
Any suggestions or links to capable firms?
MD
MHP exhausts......give Mark a call or email and he will sort you out.
I know someone who has a racefit mega and wanted it to fit a different bike he rang race fit posted it to them and they modified it to fit
Cheers for the replies
Racefit are very very under the radar when it comes to emails. Ive been waiting 3 weeks for a reply and sent a few emails to remind them!
I will try MHP and see what they say
give racefit a bell then 01629 735071
Are you using that for track days? You'll have fun with noise testing
no mate. for road use probably with db killer
Quote from: Maddog on July 02, 2014, 06:54:38 PM
no mate. for road use probably with db killer
that completely defeats the object......
Whats the object?
Quote from: Maddog on July 02, 2014, 07:11:49 PM
Whats the object?
you buy a racefit (generally) because there bloody loud quieting it down is a waste
and the quality obviously!
Ive got a racefit on the 07 zx10......leaving for work at 4am is wayyyyyyyyyyy too loud.......this is my way of making sure i dont get an ASBO :police:
ah I see you could just keep it at low revs until your out of the built up area that's what I do...
Even at idle its still way too loud. Its a one off exhaust on the 2007 zx10
ah I see better put a baffle in then