Mcnninjas.co.uk

Maintenance & Repair => Projects => Topic started by: m6rk on March 14, 2015, 10:59:04 AM

Title: project 675..
Post by: m6rk on March 14, 2015, 10:59:04 AM
Needs a little work...

(https://scontent-lhr.xx.fbcdn.net/hphotos-xpf1/v/t1.0-9/11058484_10152606974532085_1754283336334156234_n.jpg?oh=59ac3093b933a9507542ea489c473fe6&oe=5574CE48)

(https://scontent-lhr.xx.fbcdn.net/hphotos-xpf1/v/t1.0-9/14074_10152606974517085_5033729277059132374_n.jpg?oh=a326d9125636fe19333e96d16d52edc3&oe=557BC5FF)

(https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-xtp1/v/t1.0-9/11061687_10152606974497085_7689694869853854991_n.jpg?oh=9233c2fcca118059c2bc8c9cf286118d&oe=5581FEF6&__gda__=1434767155_642c5d9e2d47798d4ff451b12ae2d11b)

(https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-xap1/v/t1.0-9/11070094_10152606974547085_8888388170158330823_n.jpg?oh=f0d6a1703d4f1650734b39c4e2175cc8&oe=557E2915&__gda__=1433918016_41a4aa4bace8a7af55f1c08163ad0ab4)

Title: Re: project 675..
Post by: Dom1 on March 14, 2015, 12:21:40 PM
I'm no mechanic but I think I may have spotted the problem
Title: Re: project 675..
Post by: Millhouse on March 14, 2015, 01:29:52 PM
Is it the bloke that sold it crying and trying not to let it go?
Title: Re: project 675..
Post by: MOzZereLLa on March 14, 2015, 01:45:34 PM
Unless he paid Mark to take it away I suspect he's crying with laughter - I would be ;-)
Title: Re: project 675..
Post by: Phil_8 on March 14, 2015, 05:07:26 PM
Nice trailer!!
Title: Re: project 675..
Post by: Carbon_ZX6R on March 14, 2015, 05:32:49 PM
How little did you manage to con that for?
Title: Re: project 675..
Post by: 7550 on March 14, 2015, 06:24:54 PM
That's taking weight saving a bit too far.  ;)
Title: Re: project 675..
Post by: m6rk on March 14, 2015, 07:15:11 PM
Day 1 and the swing arm has been swapped and the engine is in
Title: Re: project 675..
Post by: Carbon_ZX6R on March 14, 2015, 07:22:58 PM
What's actully wrong with it? I.e damage?
Title: Re: project 675..
Post by: R1ch on March 14, 2015, 09:27:03 PM
Quote from: m6rk on March 14, 2015, 07:15:11 PM
Day 1 and the swing arm has been swapped and the engine is in

Good too see you pull your finger out :)

a bit of gaffer tape and a few zip ties and it'll be sorted

Give me a shout once your sorted
(how was the 22nd feb ? I ended up doing the 23rd.. was ok once the ice had melted under the bridge)

If i survive the next 4 days @ cartagena.. got 5/4 snett (again) and 10-11/5 cadwell booked with nl
(Tempted to book 6/4 @ snett with msv)
Title: Re: project 675..
Post by: m6rk on March 16, 2015, 11:40:20 AM
22nd went well had lots of luck with the weather...

https://www.youtube.com/watch?v=mPS7c4ci60I