Mcnninjas.co.uk

General Discussions => Bike Talk => Topic started by: Carbon_ZX6R on April 26, 2016, 01:29:27 PM

Title: bike transport
Post by: Carbon_ZX6R on April 26, 2016, 01:29:27 PM
Right I'm picking up my b1h next week in the van , I'm not entirely sure how to secure it , I've only ever transported bikes with wheel chocks any advise would be welcome as I don't want to smash the thing
Title: Re: bike transport
Post by: Tiiimmmaaayyyy on April 26, 2016, 01:48:42 PM
Have you heard of those strap things with ratchety bits on?
Title: Re: bike transport
Post by: Lord Danoir the first on April 26, 2016, 01:53:14 PM
are you joking?

Title: Re: bike transport
Post by: Alzo on April 26, 2016, 01:56:30 PM
Buy lots and lots and lots of Cotton wool....put the bike inside the van....not on the roof rack...then stuff the lots and lots and lots of cotton wool around the bike....drive really quickly that way the cotton wool will not move.
Title: Re: bike transport
Post by: Jonesy on April 26, 2016, 02:13:49 PM
Flip it over on its bars and seat remember like the old bmx days!

Should do it  :grin:
Title: Re: bike transport
Post by: Gilby104 on April 26, 2016, 02:47:07 PM
I think these lot are going to need a commitment of sorts from you to follow said advice Carbon my friend.
Title: Re: bike transport
Post by: Dom1 on April 26, 2016, 03:30:10 PM
Two words - bubble wrap.
Title: Re: bike transport
Post by: Carbon_ZX6R on April 26, 2016, 04:25:38 PM
I know what ratchet straps are ive just never used them the bike is 100% being put back on the road and I don't want to damage it by doing things wrong
Title: Re: bike transport
Post by: MOzZereLLa on April 26, 2016, 04:30:43 PM
Get someone to hold the bike upright in the back of the van and fill the entire loadspace with expanding foam. That'll work.
Title: Re: bike transport
Post by: Tiiimmmaaayyyy on April 26, 2016, 04:50:38 PM
Serious answer.
Put it in the van with the front wheel against the bulk head. Put it in gear, you don't have to but I do. Put a ratchet strap from the left side down to the floor on the left in front of the strap point and one from the right side down to the floor on the right in front of the strap point. Sub frame is a good place to use as this is stronger than the pillion footrest hangars. Tighten the left side first, then the right. No need to go mental on the tightness, but taught is good. I would only bother with 2 straps but obviously you can stick as many as you like on. Might be an idea to use some old tshirts under the straps to protect any paint from damage.
Title: Re: bike transport
Post by: Lord Danoir the first on April 26, 2016, 05:06:12 PM
Paddock stand helps too

I always throw a zip tie over the front brake to help stop it sliding back, but not too tight.

Handlebar straps are a good idea:

(http://i.ebayimg.com/images/g/b7UAAOxyIv5TkDpR/s-l300.jpg)

Now..... ignore everything, do it your own way..... in 6 months or so...... see you on page 8 of this thread
Title: Re: bike transport
Post by: Jonesy on April 26, 2016, 05:09:36 PM
Quote from: Lord Danoir the first on April 26, 2016, 05:06:12 PM
Now..... ignore everything, do it your own way..... in 6 months or so...... see you on page 8 of this thread

:rofl:
Title: Re: bike transport
Post by: Dom1 on April 27, 2016, 12:31:18 AM
 :rofl: oh Lord Danoir


PS do not use paddock stands or your bike may fall over.
Title: Re: bike transport
Post by: Lord Danoir the first on April 27, 2016, 07:40:31 AM
Quote from: Dom1 on April 27, 2016, 12:31:18 AM
PS do not use paddock stands or your bike may fall over.

Stop worrying the lad with facts.