Can anyone identify what bike this is off?

Bullet · February 06, 2014, 10:33:40 PM

Long shot I know, but can anyone identify what bike this cush drive, carrier and sprocket are from? was advertised for a zxr750J which it isnt as the smaller cush drive at the front is off one of those and this ones quite a bit bigger... any idea folks as id like to sell it back on ebay (listed correctly this time!) to recoup the losses from buying the wrong one

it a little written on it, 'kawasaki' on the front and 'made in japan 1100' on the back

Green_Ninja · February 07, 2014, 07:49:59 AM

Looks very much like the one on the C1H/C6F zx6r but without direct comparison it's hard to say.

Dq · February 07, 2014, 08:59:05 AM

Dont think its from a later Zx6, the cush drive on g model zx6's onwards are 4 individual rubbers.

F model ones are linked, but have protrusions on the tops of them, so don't think its from one of them.

GPZ or a ZZr maybe? If you scroll down this page they have a pic of a new one for the original model that looks like it matches that.

http://www.gpzzone.co.uk/acatalog/copy_of_Chains___Sprockets.html

0luke0 · February 07, 2014, 09:21:01 AM

Can you not look at the code on the Renthal sprocket and see which models it fits? Might give you more of an idea

Bullet · February 07, 2014, 09:37:35 AM

A google search on the Renthal seemed to help, didnt think of looking up the sprocket! Shows zxr750 H or ZZR600 (its 206A 530 46t) so he's obviously sold me an H model one! cheers luke

0luke0 · February 07, 2014, 11:20:54 AM

No worries

Green_Ninja · February 07, 2014, 11:26:41 AM

Quote from: Bullet on February 07, 2014, 09:37:35 AM
A google search on the Renthal seemed to help, didnt think of looking up the sprocket! Shows zxr750 H or ZZR600 (its 206A 530 46t) so he's obviously sold me an H model one! cheers luke

ah maybe that's why it looked familiar I fitted a ZZR600 rear wheel (and front end) to my GPZ900R.

Bullet · February 07, 2014, 12:01:15 PM

Quote from: Green_Ninja on February 07, 2014, 11:26:41 AM
Quote from: Bullet on February 07, 2014, 09:37:35 AM
A google search on the Renthal seemed to help, didnt think of looking up the sprocket! Shows zxr750 H or ZZR600 (its 206A 530 46t) so he's obviously sold me an H model one! cheers luke

ah maybe that's why it looked familiar I fitted a ZZR600 rear wheel (and front end) to my GPZ900R.

the GPZ500 cush drive looks the same as the correct ZXR one in the photo though, good to know if i need another second hand one as the zxr ones hardly ever pop up on ebay it seems!