brakepads

Started by ben68, April 19, 2015, 07:45:55 PM

Previous topic - Next topic

ben68

Been looking on ebay for a new set of front pads but can't make my mind up which one's...... sintered or ordinary ceramic carbon is there much difference had the front's off today but can't really tell which one's they are (not much meat left on them) thanks for any info in advance

Carbon_ZX6R

They all very ive had £15 "organic" pads preform better then brembos  it all depends on what you use them for
2004 ZX-6R B1H    
- Full Akra Titanium System                
- Gilles rear sets                     
- R&G Crash Bungs
- Hyperpro Rsc Damper
- Many other mods

ben68

it would only be for the road though i do want something decent been looking at goldfren but they only seem to be sintered one's

Carbon_ZX6R

Quote from: ben68 on April 19, 2015, 08:26:29 PM
it would only be for the road though i do want something decent been looking at goldfren but they only seem to be sintered one's
Demon tweaks do some "organic" ebc ones for about 15 quid had them on a r6 and that thing really stopped hard! Like stupidly hard id give them a look
2004 ZX-6R B1H    
- Full Akra Titanium System                
- Gilles rear sets                     
- R&G Crash Bungs
- Hyperpro Rsc Damper
- Many other mods

ben68


[/quote]
Demon tweaks do some "organic" ebc ones for about 15 quid had them on a r6 and that thing really stopped hard! Like stupidly hard id give them a look
[/quote]cheers for that will have a look at them

Carbon_ZX6R

2004 ZX-6R B1H    
- Full Akra Titanium System                
- Gilles rear sets                     
- R&G Crash Bungs
- Hyperpro Rsc Damper
- Many other mods

Green_Ninja

Why would you be looking at 'Cheap' brake pads, Brakes and tyres are the most important things on your bike, your life depends on them, just buy OEM pads as you can be sure they will work correctly.

Carbon_ZX6R

Nothing wrong with ebc pads
2004 ZX-6R B1H    
- Full Akra Titanium System                
- Gilles rear sets                     
- R&G Crash Bungs
- Hyperpro Rsc Damper
- Many other mods

Green_Ninja

Quote from: Carbon_ZX6R on April 19, 2015, 09:20:02 PM
Nothing wrong with ebc pads

no they are a good make, however in my experience for road use you cannot beat OEM

ben68

i would never think of putting cheap parts on my bike would rather pay for the right ones than settle for anything less especially when it comes to brakes and tyre's just wondered what others use regarding pads and which is the best to go with

ash

Oem pads are sintered. I've used ebc as well as Carbon Loraine sintered Race pads. The latter are disk munchers.ebc worked well enough though.  I've read some pretty poor write ups on the Gold Fren pads also.

Carbon_ZX6R

The pads ive reccomended are not cheap pads demon tweeks just do them cheap
2004 ZX-6R B1H    
- Full Akra Titanium System                
- Gilles rear sets                     
- R&G Crash Bungs
- Hyperpro Rsc Damper
- Many other mods

Tiiimmmaaayyyy


PJ

I found EBC HH pads to be great in hot weather with lots of abuse but offer very little initial bite and feel. If it's cold and wet and you aren't a heavy braker they are simply awful.

I used Brembo SC pads on the R1 and were awesome, but for road use I can't really fault OEM pads.

andy dutton

Trouble with EBC pads is they are noisy and are renowned for wearing discs...

i always used standard pads, trackday or road and never have any issue...