Help please - anyone got a pic of how the rear brake switch works

[Foo]

On the standard rearset on a 2005 ZX10r

[Raydial]

Does this help at all?

The actual switch is part 27010 at the bottom left of this image.


And rear brake master cylinder.


http://www.bikebandit.com/oem-parts/2005-kawasaki-ninja-zx-10r-zx1000c/o/m149181#sch435645

[the invisible dog]

Well found Ray!
Took me a while to get the right fiche 

27010 is actually the side-stand switch 
27010A is the rear brake light switch 
Spring 92415 links the plunger to a lug on the brake lever
Switch sits in a hole in a simple bracket on the frame and adjusts, by height in the bracket, with a plastic nut
I know I had a problem with mine, think a cracked bit of the plastic somewhere, but managed to adjust it out somehow

What's your issue, Faye?
Let me know and I can go take pics if they'll help... 
Do you need a workshop manual?

[Raydial]

27010 is actually the side-stand switch 

Thanks for correcting me. 

[Foo]

Thanks ever so much guys....  Now fixed and working and i'm off for an MOT retest tomorrow..  After doing that, and errrrr putting my front wheel on the right way around 

[the invisible dog]

Aah, the joys of Kawasaki part numbering!
Good luck with the MOT 

[Phil_8]

this thread is far too helpful for this forum!