cheap ebay levers??

[ash]

Sounds like you ordered the wrong ones. They differ from year to year.

[Coxy]

Bargain of the year

[Carbon_ZX6R]

Sounds like you ordered the wrong ones. They differ from year to year.

pretty sure I didn't the brake fits fine and the clutch fits its just extremely tight and stops the lever going completely out the mount looks bent to me so if I shave a tiny bit off they should be fine

[Tiiimmmaaayyyy]

Where can I get some of these levers, they sound awesome

[PJ]

Where can I get some of these levers, they sound awesome

[ash]

IIRC, the B1's use the clutch bracket off the A1p, and a new MC, and the C1 uses the same MC bracket off the B1, but a new clutch lever bracket. There are slight differences, and I got it wrong first time inadvertently ordering that for a C1 not B1 (my bad) and had to send one of the levers back for an exchange...which fitted perfectly.

They are precision made, you shouldn't have to fettle anything to make htem fit if your old levers are standars and in good condition.

[Gilby104]

Alternatively I am test riding the new Street Triple on Saturday until about 1pm. Could go out for a spin afterwards?

Standard or R version? either way make sure you have enough for a deposit as you'll buy one ;-)

Standard I believe, I didn't as I just asked if they had a demo. I think I'll wait anyway as it's all thunder and shite tomorrow. I'll be on the pedal bike!

[Carbon_ZX6R]

well ive just borrowed some pazzo levers off a used bike (same lever part number) and  they fit exactly the same meaning that the mount is slightly bent (standard levers appear slightly thinner)

[0luke0]

Is it a brown clutch perch?  I think I have one if you want it

[Lord Danoir the first]

Well, out of morbid curiosity, I ordered a pair of levers off ebay from China for the Buell.

They were under £15 delivered so I was expecting a laugh and for them to go straight in the bin.

I'm genuinely gobsmacked.... they arrived in less than a week, appear to be superb quality and they fit perfectly....... I may actually put my life in their hands and keep them on, they look so good!!

[Dom1]

You utter utter hypocritical Judas!

Your dire warnings about levers that fell off in the garage have cost me a fortune, but I was happy and smug in the certain knowledge that Sir Danoir would approve, and now this.

*illusions shattered*

[Phil_8]

This is running nicely alongside the leathers debate with T.C.

[ash]

Take a sledgehammer to one which is bolted to the OEM bracket...see what gives up the ghost first and then report back. Mine look as good as the day they were fitted...even the anodising is still bright.

[Carbon_ZX6R]

hahah made me laugh got mine to fir properly when I bent the perch back into shape

[Coxy]

You utter utter hypocritical Judas!

Your dire warnings about levers that fell off in the garage have cost me a fortune, but I was happy and smug in the certain knowledge that Sir Danoir would approve, and now this.

*illusions shattered*

Made me laugh ^^^^^

Dan must be on the Board of Pazzo